Case 1: SS304 chevron mist eliminator for ID3000 mm gas washer. Normal C type of 170mm plate height, 0.8mm / 1mm thickness.

The vane pack mist eliminator can work well under normal atmospheric conditions. For equipment based on direct interception and inertial separation, gas flow rate affects the key steps of the separation process (impaction, coalescence, and liquid drainage). If the gas flow hinders liquid drainage, flooding or re-entrainment of liquid droplets may occur. Therefore, it is important to determine the appropriate superficial gas velocity of the equipment through calculation, thereby determining the effective working area of the demister.

Case 2: Customized C plate with 100mm height in 2205 material, full-circle fabrication as per order.

Case 3: 34 pcs of small-diameter vane pack demister with high peaks and rod-through connection. Edge beveling treatment allows the plate demister's diameter to be closer to the tower's inner diameter, resulting in a larger effective working area.

Liquid entrainment in process gas streams can be formed by dynamic processes, such as contact between gas and liquid phases in mass transfer operations, or thermal processes, such as condensation. Wojun chevron plate demisters provide an excellent solution option for liquid entrainment problems in many types of equipment. These equipment include distillation columns, stripping columns, absorption towers, scrubbers, evaporators, falling-film condensers, separation tanks, three-phase separators, seawater desalination plants, gas dehydration units and compression systems, refrigeration units, etc.